Vinyl shake siding is an attractive, long-lasting, and more sustainable siding option than cedar wood. The vinyl looks very similar to the traditional wood but comes with many other benefits. It is lighter and thus easier to install, and it is cheaper than real wood.
Despite its benefits, you’re probably also wondering if vinyl shake material is more expensive. Let’s take a look at the kinds of vinyl shake siding and their costs, so you can decide if this material is right for you!
Contents
Vinyl Shake Siding Cost
You can typically expect to pay between $6122 and $ 15 933 for vinyl shake siding on your entire home. It is the most affordable option available, but each house is different and has its own set of specifications.
Cost Per Square Foot
The vinyl shake siding cost is an average of $7.50 per square foot, depending on which brands and styles you select. It is usually $3 per square foot for the house’s low side and $12 per square foot on the house’s higher side. Labor costs around $3.70 per square foot if you get a contractor to do the installation work for you.
It would be best if you also considered the cost of other necessary building supplies and equipment.
Cost Suggestions on Different Styles
Vinyl siding comes in a variety of designs. Below are the types available and their average price per square foot:
- Insulated — $8
- Vinyl shake — $6.50
- Vinyl log — $4
- Vertical — $5.50
As you can see, vinyl shake siding cost is the second most expensive next to insulated. It is still far cheaper than wood siding, which comes in at about $9 or more per square foot on average. Labor and supplies can push it up to $10 per square foot.
Finishing Touches
When putting up your siding, don’t forget that there will be some trimming and polishing extras to add. These include Fascias and Soffits and come in linear feet at $20 and %25, respectively.
Other Siding Materials and their prices
You can get other materials than vinyl, but these usually work out to be more expensive. Here’s what the different options are and how they measure up price-wise per square foot to vinyl:
- Vinyl — $5 (overall average)
- LP Smartside — $10.50
- Wood — $9.25
- Brick — $8.25
- Fiber cement — $6.05
- Aluminum — $3.50
As you can see, siding prices are determined by the siding materials. Materials that are easier and cheaper to manufacture will have more reasonable retail prices. The overall cost is also determined by how large the surface is that needs siding, labor, and the extra supplies needed to cut and secure the panels.
DIY or Hire an Expert?
Putting in the new siding on a from-scratch build or replacing old siding on an existing house requires expertise and the right equipment. While it is not impossible to do the work yourself, it may be beyond your skill level if you have not done the job under expert supervision many times before.
The work could end up costing you more if you are not an expert and make mistakes. Having to purchase more supplies after errors is a grudge purchase. Such a scenario is less likely to occur if an expert is doing the job.
Instead of stressing about pulling off this DIY project, let us help you install your inexpensive vinyl shake materials. Get in touch with us today to learn more about our costs and how we can help!
Contact Us for The Best Vinyl Shake Siding Cost Today!
You could spend ages researching information on vinyl shake siding cost and still not get a 100% accurate quote. Reach out to one of our professionals through our form today and get a customized estimate
Author
